Video
Product Introduction
NKW200Q Cardboard Baler Press Machine is a device for compressing waste cardboard that can compress the loose waste cardboard into firming. The compression size of the machine is 1100mm (W) × 1100mm (H) × ~ 1800mm (L), which can handle larger waste cardboard materials. It uses hydraulic transmission technology, which has high efficiency and stability. In addition, the machine is equipped with 37kW × 2SETS+15KW main motor and a weight of about 30 tons to ensure the stability and reliability of its operation.Usage
NKW200Q Cardboard Baler Press Machine is a device for compressing waste cardboard. The characteristics are as follows: 1. High -efficiency compression: The machine uses a high -pressure, fast large automatic hydraulic compressor, which can effectively handle a large amount of loose waste cardboard materials and compress it into a firming block. 2. Automation: NKW200Q Cardboard Baler Press Machine is a full -automatic hydraulic block machine that is suitable for handling a large amount of soft waste daily, such as cardboard/OCC, plastic film, natural fiber, textile waste, soft plastic packaging, soft plastic packaging Newspaper Magazine and so on. 3. Save space: By compressing and packing waste cardboard, this machine can greatly save storage space, which is of great significance for the recycling of waste cardboard. 4. Widely used: not only can be used to compress the waste cardboard, but also process other types of compressed materials, such as plastic film, PET bottle, plastic tray, waste paper, grass, fiber, old clothing, carton, cardboard corners, fragments, fragments wait. 5. Save resources: The use of NKW200Q Cardboard Baler Press Machine is helpful for saving resources, and it has important value for the use of renewable resources such as waste cardboard.Parameter Table
| Item | Name | parameter |
| mainframe parameter | Bale size | 1100mm（W）×1100mm（H）×～1800mm(L) |
| Material type | Scrap Kraft paper, Newspaper, Cardboard ,Soft Film, Plastic， | |
| Material density | 650～750Kg/m3（Moistures 12-18%） | |
| Feed opening size | 2400mm×1100mm | |
| Main motor power | 37KW×2sets+15KW | |
| Main cylinder | YG300/230-2900 | |
| Main cylinder force | 200T | |
| Capacity | 28-30Ton/hour | |
| Max. system working force | 30.5MPa | |
| Mainframe weight(T) | About 30 tons | |
| Oil tank | 2m3 | |
| Mainframe size | About 11×4.3×5.8M（L×W×H） | |
| Tie wire line | 4 line φ3.0-3.2mm3 iron wire | |
| Pressure time | ≤30S/ (go and back for empty load) | |
| Chain conveyor technology | Model | NK-III |
| Conveyor weight | About 7 tons | |
| Conveyor size | 2000*14000MM | |
| terra hole size | 7.303M（L）×3.3M（W）×1.2M（deep） | |
| Conveyor motor | 7.5KW | |
| Cool tower | Cool tower motor | 0.75KW（water Pump）+0.25（Fan） |
Product Details
